Product code: TS-BA36WB
Power (wattage): 36W
Mounting type: Ceiling Surface Mounted
Connection: Both End have Connector and Linkable (Quick connection)
Length: 1200MM
Input voltage: 220-240V AC 50/60HZ
LED Driver: Non-isolated driver
LED source: Epistar 2835 30-32lm/LED
LED quantities: 192pcs
LED Lumens: 4320lm+/-3%
Efficiency: 120lm/W
LED CRI: >80Ra
Beam angle: 180°
IP Rate: IP66
Check below for more about Easy clips installation LED batten ceiling light
Warm White (2700-3500K), Neutral White(4000-4500K), Cold White(5000-6500K)
Lumens
2160lm
4320lm
5400lm
Efficiency
120lm/W
Beam Angle
180°
Material
PC body+Aluminium inside
Size
L600 x W83 x H60 mm
L1200 x W83 x H60 mm
L1500 x W83 x H60 mm
Body Color
White
Connection
Both End have Connector and Linkable
Operating Temp.
-30 ~ 75℃
Easy clips installation LED batten ceiling light
An LED batten ceiling light with easy clips makes the installation process even simpler and quicker. These types of lights come with a clip-in mounting system that allows for a hassle-free installation without the need for screws or drilling. Here's a step-by-step guide to help you install an easy clips LED batten ceiling light:
Safety first: Before starting any work, always turn off the power to the area where you'll be installing the light. Turn off the circuit breaker or remove the fuse connected to the circuit you're working on. Use a voltage tester to ensure there is no electricity flowing through the wires.
What you'll need:
- Easy clips LED batten light
- Wire stripper
- Wire nuts or connectors
- Ladder
- Voltage tester
Step 1: Choose the installation location
Determine the desired location for the LED batten light on your ceiling. Ensure the location provides adequate coverage and is free of any obstructions.
Step 2: Attach the mounting clips
Most easy clips LED batten lights come with mounting clips that can be quickly attached to the ceiling. Simply push or slide the clips into the appropriate grooves on the back of the light fixture. The number of clips required may vary depending on the size of the light.
Step 3: Secure the light to the ceiling
Position the LED batten light at the chosen location, ensuring the clips align with the ceiling surface. Gently push the light upward, allowing the clips to latch onto the ceiling. The clips should hold the light securely in place.
Step 4: Prepare the wires
Strip approximately 1/2 inch of insulation from the ends of the wires coming from the ceiling and the LED batten light. You should have at least three wires from both the ceiling and the light: live (usually black or red), neutral (usually white), and ground (usually green or bare copper).
Step 5: Connect the wires
- Connect the live wires: Twist the live wire from the ceiling with the live wire from the LED batten light. Secure the connection with a wire nut or connector.
- Connect the neutral wires: Repeat the process with the neutral wires from the ceiling and the light, using another wire nut or connector.
- Connect the ground wires: If your LED batten light has a ground wire, connect it to the ground wire from the ceiling using a wire nut or connector. If there is no ground wire from the light, attach the ground wire from the ceiling to a grounding screw on the light's metal frame (if available).
Step 6: Secure the connections
Ensure all wire connections are secure, and wrap them with electrical tape to provide additional insulation. Gently tuck the connected wires into the ceiling junction box or the back of the LED batten light.
Step 7: Restore power and test
Turn the power back on at the circuit breaker or replace the fuse. Test the LED batten light by turning it on to ensure it's working correctly.
Please note that this guide is for general reference only. Always follow the manufacturer's instructions for your specific easy clips LED batten light and consult a professional electrician if you're unsure about any aspect of the installation process.
Download
REQUEST MORE DETAILS
Please fill out the form below and click the button to request more information about